Enquiry form for Spray Cooler of TTPL

ENQUIRY FROM FOR SPRAY COOLING PLANT

1. Client Information
1.0 Company's Name
1.1 Address
1.2 Contact Person
1.3 Contact Numbers format: (ISD-STD-TEL No.)	Office Residence Fax E-mail Address
2. Product Information
2.1 Name of the Product
2.2 Temperature at which Material Melts	⁰C.
2.3 Density/Specific Gravity of Feed
2.4 Viscosity
2.5 pH Value
2.6 Is the feed	Other
2.7 Normal feed temperature	⁰C.
2.8 Specific heat of feed
3. Cooler Capacity Data:
3.1 Powder output
3.2 Working hours per day
4. Powder Properties desired:
4.1 Bulk Density of Powder
4.2 Powder particle size
5. Powder Properties:
5.1 Specific Gravity of material
5.2 Is the powder	Other
5.3 Type of final packing for powder	Other
6. MOC for Dryer
Material Of Construction for dryer	AISI 304 Mild Steel AISI 316 Mild Steel Other
7. Installation Data
7.1 Location & Lowest ambient temp
7.2 Space that can be made available	Heightm Lengthm Widthm
7.3 Installation	Outdoor Indoor
8. Utilities available
8.1 Chilled Water	⁰C. m³/hr.
8.2 Compressed Air	bar m³/hr.
8.3 Steam	bar ⁰C. kg/hr.
9. Brine Available
9.1 Brine Temp available (Typ.)	⁰C.
10. Present Cooling Procedure
10.1 Present procedure of cooling liquid
10.2 Present procedure of powder recovery
10.3 Manpower employed	Person/Shift No. of Shifts/days
10.4 Present output of Cooling Process	kg/hr
10.5 Present Drying cost(approx.)	Rs/kg

[Home] [Products] [Corporate Profile] [Technology Resource] [Technical Information]