|
Product Code - PDCP 14
Product - High Efficiency Blowers & Fans
Exclusive Features
 |
Performance - |
- We have PROPRIETARY DESIGN SOFTWARE developed
in-house for design of centrifugal blower & fan.
- Proper design ensures High efficiency of upto 85%.
- The blower is tested for following -
 |
Vibration free
performance tested to ISO 1940 and IS 11723 part I |
|
The blower is tested for required
flow rate and pressure as per IS 4894. |
|
Tested for bearing
temperature rise. |
|
Constructional features - |
- The bearing block has following advantages –
 |
Single piece bearing housing
machined in one setting to eliminate alignment problems during assembly and
maintenance. |
|
The body is fabricated
and not cast avoiding casting defects like blowholes, porosity. Hence has better
strength and rigidity. |
|
Heavy-duty ball bearings
are used for long trouble free performance. |
|
Grease lubricated to
increase bearing life. |
- Drain plug
is provided for condensate removal.
- Access door
is provided for inspection /cleaning.
- Damper
is provided at outlet to control airflow rate.
- Manometer tapings
are provided at inlet & outlet to
facilitate pressure drop measurement.
- Direct driven & belt driven construction is available.
- Guards at air inlet & belt
are provided that make installation
safe.
- Rigid base frame and supports
are provided for vibration
free performance.
- We can supply blower & fan for air / gas temperatures
between -30° C to 700° C.
- The material of construction can be AISI 304, AISI 316, AISI
310, Carbon Steel, and custom made.
- We give low speed blowers for erosion free performance.
|
Optional Instrumentation - |
- Vibration switch
to give alarm if the vibrations
increase above acceptable limits.
- Digital temperature controller
to monitor temperature of
bearings.
- Manometer
to measure pressure developed by the blower /
fan.
- Air Flow measurement instrumentation.
|
